Technical data
A.11 Technical data: FL1F-K2BM2
IDEC SmartRelay Manual
300
A.11 Technical data: FL1F-K2BM2
FL1F-K2BM2
Power supply
Input voltage 24VDC
Permissible range 20.4VDC to 28.8 VDC
Power consumption 15mA to 82 mA
Voltage failure buffering Typ. 10 ms
Power loss at 24 VDC 0.4W to 2.0 W
Electrical isolation No
Reverse polarity protection Yes
Ground terminal For connecting ground and shielding of the analog
output line.
Analog outputs
Number 2
Voltage range 0VDC to 10 VDC
Voltage load ≥ 5 kΩ
Current output 0/4mA to 20 mA
Curreny load ≤ 250 Ω
Resolution 10 bit, normalized to 0 to 1000
Cycle time for analog output Depending on installation (50 ms)
Electrical isolation No
Line length (shielded and twisted) Max. 10 m
Error limit Voltage output: ± 2.5% FS
Short circuit protection Voltage output: Yes
Overload protection Current output: Yes
Voltage output: Yes
To Next Page
Loading...
