F
IDEC SmartRelay Manual
321
Abbreviations
AM Analog module
B1 Block number B1
BM Base Module
C IDEC SmartRelay device designation: integrated clock
Cnt Count = Counter input
Dir Direction (of count, for example)
DL Data Log
DM Digital Module
EM Expansion Module
En Enable = switching on (for example, clock generators)
FL1F device The latest Base Module version, described in this manual
Fre Input for frequency signals to be analyzed
GF Basic Functions
Inv Input for inverting the output signal
NAI Network analog input
NAQ Network analog output
NI Network input
No Cam (parameter of the timer)
NQ Network output
Par Parameter
R Reset input
Ral Reset all = Input for resetting all internal values
S Set (latching relay, for example)
SF Special functions
T Time = parameter
TDE Text Display with Ethernet interfaces
Trg Trigger (parameter)
UDF User-Defined Function
To Next Page
Loading...
Need help?
General
