IDEC SMARTRELAY

A
IDEC SmartRelay Manual
283
Technical data
A.1 General technical data
Criterion Tested in accordance with Values
Base Modules (FL1F)
(Version with display)
Dimensions (WxHxD)
Weight
• Modules with relay output
• Modules with transistor output
Installation
(Version without display)
Dimensions (WxHxD)
Weight
• Modules with relay output
• Modules with transistor output
Installation
71.5 x 90 x 60mm
Approx. 240 g
Approx. 195 g
On a 35mm profile rail four
module widths or wall mounting
71.5 x 90 x 58mm
Approx. 200 g
Approx. 160 g
On a 35mm profile rail four
module widths or wall mounting
IDEC SmartRelay expansion modules
FL1F-M08...
Dimensions (WxHxD)
Weight
• Modules with relay output
• Modules with transistor output
Installation
35.5 x 90 x 58mm
Approx. 130 g
Approx. 95g
On a 35mm profile rail two
module widths or wall mounting
IDEC SmartRelay expansion modules
FL1F-J2B2/K2BM2
Dimensions (WxHxD)
Weight
Installation
35.5 x 90 x 58mm
Approx. 95g
On a 35mm profile rail two
module widths or wall mounting
FL1F-RD1 (Text Display with Ethernet
interfaces)
Dimensions (WxHxD)
Weight
Installation
128.2 x 86 x 38.7mm
Approx. 220g
Bracket mounting
Climatic conditions
Ambient temperature
• Horizontal installation
• Vertical installation
Low temperature to IEC
60068-2-1
High temperature to IEC
60068-2-2
0°C to 55°C, no condensation
0°C to 55°C, no condensation
Storage/shipping - 40°C to +70 °C, no
condensation
Relative humidity IEC 60068-2-30 From 10% to 95% no
condensation
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com