Configuring IDEC SmartRelay
8.1 Selecting parameter assignment mode
IDEC SmartRelay Manual
254
4. Confirm placing IDEC SmartRelay in STOP mode by pressing O with the cursor on .
IDEC SmartRelay shows the main menu of the programming mode:
For more information about switching IDEC SmartRelay to RUN mode, refer to Section
Switching IDEC SmartRelay to RUN mode (Page 74).
Description of other menu commands of the parameter assignment menu
Menu command
For information on the various settings, refer to the following topics:
Parameters (Page 255)
Selecting the parameters (Page 255)
Modifying parameters (Page 256)
Assigning a circuit program name (Page 69)
Menu command
For information on the various settings, refer to the following topics:
Setting the time of day and date (Page 259)
Summertime/wintertime conversion (Page 90)
Setting the start screen (Page 265)
Setting the display contrast and backlight choice (Page 261)
Setting the default values for IDEC SmartRelay (Page 258)
Menu command
For information on the various settings, refer to the topic Configuring network settings
(Page 94).
Menu command
For information on the various settings, refer to the topic Diagnosing errors from IDEC
SmartRelay (Page 100).
1HWZRUN
'LDJQRVWLFV
&DUG
6HWXS
3URJUDP
6WDUW
1
2
3
4
1HWZRUN
'LDJQRVWLFV
3URJUDP
To Next Page
Loading...
Need help?
General
