IDEC SmartRelay Manual
279
IDEC SmartRelay software
11.1 IDEC SmartRelay software
Upgrading previous WindLGC versions
You can use the following menu command in WindLGC V8.0 to upgrade WindLGC V2, V3,
V4, V5, or V6 to V8.0.
You can find type numbers in Section "Type numbers (Page 319)".
To upgrade from an old version to a new version, follow these steps:
1. Install the new software from the DVD.
2. When the system prompts you for the previous version, place the old WindLGC DVD in
the DVD drive.
3. Point your browser to the "...\Application" directory on the DVD.
Updates and information
You can download demo versions of the software free of charge from the Internet address
specified in the Preface (Page ii).
For detailed information on updates, upgrades and the WindLGC Update Center, refer to the
Online Help for WindLGC.
To Next Page
Loading...
Need help?
General
