Janus JFS-A1 - Programming Functions Overview

Page: 54
JFS-A1 INSTALLATION, OPERATION, AND INSTRUCTION MANUAL
Document #: DOC230
Issued: August 27, 2012
Revised: N/A
Programming Functions Overview
e table below gives you a snapshot of the menu order along with a brief description of each. Details for these
options are provided on the following pages.
Table 12: Programming Menu Overview
Menu Option Description
Remote Access
Code
Displays remote access “User Name” and “Password”.
Job Details Allows site specic information to be entered.
General Options
Allows software’s general panel settings to be customized, such as alarm verication
time, and door holder low AC dropout delay.
Zones Dene and congure zone’s characteristics and mapping points.
Cross Zones Establish relationships between multiple zones.
Points Dene and view all addressable and non-addressable points.
Sensitivity
Enable Day/Night Sensitivity, setup Holiday schedule, and other related sensitivity
options.
E-mail Reporting
Schedule e-mail reports by day and time; setup e-mail addresses, and select type of
report(s) to send to each e-mail addressee.
Users Create up to ten (10) user codes and passwords, and set access rights.
LAN Settings Congure Ethernet connectivity options.
Dialer Add or remove DACT module/appliance.
IP Reporting Congure IP reporting options for primary and secondary accounts.
Class A Card Add or remove Class A card.
Annunciators Add or remove Remote Annunciators.
SLC Loop View SLC Loop details.
Power Supply Add or remove Power Supplies.