Janus JFS-A1 - Remote Access Code; User Name; Password

Page: 55
JFS-A1 INSTALLATION, OPERATION, AND INSTRUCTION MANUAL
Document # : DOC230
Issued: August 27, 2012
Revised: N/A
Remote Access Code
e Panel Conguration window displays the remote access user name and password on the right section of the
screen (refer to the example shown below).
Figure 62. Example of the Panel Conguration Screen
UserName/Password
e default user name and password is “Potter” as shown below; they can be changed to ensure that only authorized
personnel can transfer data to and from the panel.
Figure 63. Remote Access Code Screen
Notes:
1. e remote access user name and password may be changed to increase security on the system.
2. e remote user name and password must match the panel’s user name and password.