ii
Variable Speed Drive Series III
VARIABLE SPEED DRIVE SERIES III LIT-12012999—June 2018 www.johnsoncontrols.com
Disclaimer of warranties and limitation of liability
The information, recommendations, descriptions, and safety notations in this document are based on Johnson Controls’
experience and judgment and may not cover all contingencies. If further information is required, a Johnson Controls sales
office should be consulted. Sale of the product shown in this literature is subject to the terms and conditions outlined in
appropriate Johnson Controls selling policies or other contractual agreement between Johnson Controls and the purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES
OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY
EXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF JOHNSON
CONTROLS. THE CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT
BETWEEN THE PARTIES.
In no event will Johnson Controls be responsible to the purchaser or user in contract, in tort (including negligence), strict
liability, or otherwise for any special, indirect, incidental, or consequential damage or loss whatsoever, including but not
limited to damage or loss of use of equipment, plant or power system, cost of capital, loss of power, additional expenses
in the use of existing power facilities, or claims against the purchaser or user by its customers resulting from the use of the
information, recommendations, and descriptions contained herein. The information contained in this manual is subject to change
withoutnotice.
Cover Photo: Johnson Controls Variable Speed Drive Series III
To Next Page
Loading...
Need help?
General
