Johnson Controls VS3 Series User Manual

16 VARIABLE SPEED DRIVE SERIES III LIT-12012999—June 2018 www.johnsoncontrols.com
Chapter 3—Menu overview
M — Monitor
In monitor page, user shall not be able to edit the parameters except multi-monitor parameter. Multi-monitor parameters
allowfor displaying 3 monitor values on display. The three values can be changed to any of the listed values.
The navigation for monitor is as Figure 17.
Figure 18. M—Monitor
BYPASS JOG
UP key
Down key
twice
Ok key
Down key
Right / OK key
Right / OK key twice
Down Key 10 times
Right key
13:53
S - Startup Wizard
M - Monitor
P - Parameter
BYPASS REVERSE
13:53
STP FWD KEY MON
BYPASS REVERSE
13:53
M10: Multi-Monitoring
STP FWD KEY MON
BYPASS REVERSE13:53
STP FWD KEY MON
M1: Basic
M10: Multi-Monitoring
M9 – MWH Monitor –
BYPASS REVERSE13:53
M1.2: Freq Reference
M1.1: Output Frequency
M1.13: RTC Battery Status–
BYPASS REVERSE13:53
STP FWD KEY MON
Output Frequency –
Freq Reference – 0.00Hz
Motor Speed - 0
BYPASS REVERSE13:53
STP FWD KEY MON
Output Frequency 0.00 Hz
Motor Speed – 0 rpm
M1.2 - Freq Reference
BYPASS REVERSE
13:53
STP FWD KEY MON
Output Frequency – 45Hz
Motor Speed – 0 rpm
M1.4 - Motor Current
BYPASS REVERSE
13:53
STP FWD KEY MON
Output Frequency – 45Hz
Motor Speed – 0 rpm
Motor Current – 0.0A
M1 – Basic
M2 – IO Status
STP FWD KEY TPM
STP FWD KEY MON
M9: MWH Monitor
M10 – Multi-Monitoring
M1: Basic
Right / OK key
STP FWD KEY MON
BYPASS REVERSE13:53
M1.3: Motor Speed
M1.2: Freq Reference
M1.1: Output Frequency–
0.00 Hz

Johnson Controls VS3 Series Specifications

General

Brand	Johnson Controls
Model	VS3 Series
Category	Inverter
Language	English