24 VARIABLE SPEED DRIVE SERIES III LIT-12012999—June 2018 www.johnsoncontrols.com
Chapter 3—Menu overview
4. P13.1.7 Password
Password protects the parameters’ security. Zero means
not used, otherwise in use. If password is in use, user
can still see the values of parameters, but needs to
enter the password before editing. User must enter
current password before changing the password.
0000 shall mean that the password is not used, the
password is 0000 by default.
The password range shall be 0001–9999, the setting of
password and checking of password are as Figure 25.
Enter the password setting page. If the password
is 0000, then the “Not use” shall be shown. If the
password is not 0000, then the “in use” shall be shown.
If the password is in use, and user inputs the wrong
password, then the “failed” shall be shown.
After “failed” is shown 3 seconds, the page shall return
to the parameter read page.
If the password is in use, and user inputs the right
password, then the value shall flash, which indicates
that it can be edited.
Figure 26. Password
BYPASS REVERSE13:53
STP FWD KEY PAR
P13.1.6 - Parameter Comparison
P13.1.8 - Parameter Lock
P13.1.7
Password
Not use
Right/OK key
BYPASS 13:53
STP FWD KEY PAR
13:53
STP FWD KEY PAR
OK key
13:53
STP FWD KEY PAR
P21.1.7
In use
Password
13:53
STP FWD KEY PAR
13:53
STP FWD KEY PAR
P2.2.4
0-100%
AI1 Signal Range
Right/OK key
13:53
STP FWD KEY PAR
P2.4.2
0-100%
AI1 Signal Range
13:53
STP FWD KEY PAR
P2.4.2
0001
Password?
OK key
Password right
OK key Password wrong
13:53
STP FWD KEY PAR
P2.4.2
Failed
Password?
After 3s
Right key
13:53
STP FWD KEY PAR
0000
Up key
Password
P13.1.7
0001
Password
Right key
Password in use
13:53
STP FWD KEY PAR
P2.4.2
0000
Password?
Up key
STP
BYPASS
BYPASS BYPASS
BYPASS BYPASS
BYPASS
BYPASS
BYPASS
BYPASS
FAVORITE
REVERSE
FAVORITE
FAVORITE
FAVORITE
FAVOIRTE
FAVORITE
FAVORITE
FAVORITE
P13.1.7 - Password
P2.4.1 - Al 1 Mode
P2.4.3 - Al 1 Custom Min
P2.4.2 - Al 1 Signal Range
P13.1.7
FAVORITE
To Next Page
Loading...
Need help?
General
