Juniper EX Series User Manual

Table 85: Filtering System Log Messages (continued)
Your ActionFunctionField
To generate a raw report:
1. Click Generate Raw Report.
The Opening filteredEvents.html
window appears.
2. Select Open with to open the HTML file
or select Save File to save the file.
3. Click OK.
Generates a list of event log messages in
nontabular format.
Generate Raw Report
NOTE:
• Starting in Junos OS Release
14.1X53, a Raw Report can be
generated from the log
messages being loaded in the
Events Detail table.The
Generate Raw Report button
is enabled after the event log
messages start loading in the
Events Detail table.
• After the log messages are
completely loaded in the
Events Detail table, Generate
Raw Report changes to
Generate Report.
To generate a formatted report:
1. Click Generate Report.
The Opening Report.html window
appears.
2. Select Open with to open the HTML file
or select Save File to save the file.
3. Click OK.
Generates a list of event log messages in
tabular format, which shows system details,
events filter criteria, and event details.
Generate Report
NOTE: Starting in Junos OS
Release 14.1X53, a Formatted
Report can be generated from
event log messages being
loaded in an Events Detail
table.The Generate Report
button appears only after event
log messages are completely
loaded in the Events Detail table.
The Generate Raw Report
button is displayed while event
log messages are being loaded.
Meaning Table 86 on page 190 describes the Event Summary fields.
NOTE: By default, the View Events page in the J-Web interface displays the
most recent 25 events, with severity levels highlighted in different colors.
After you specify the filters, Event Summary displays the events matching
the specified filters. Click the First, Next, Prev, and Last links to navigate
through messages.
189Copyright © 2017, Juniper Networks, Inc.
Chapter 16: Monitoring Tasks

Juniper EX Series Specifications

General

Brand	Juniper
Model	EX Series
Category	Switch
Language	English