Table 93: Summary of DHCP Output Fields (continued)
Additional InformationValuesField
Date and time the lease expires, or never for leases
that do not expire.
Lease
Expires
Pools tab
Subnet on which the IP address pool is defined.Pool Name
Lowest address in the IP address pool.Low
Address
Highest address in the IP address pool.High
Address
Addresses excluded from the address pool.Excluded
Addresses
Clients tab
Name of the logical interface.Interface
Name
Vendor identification.Hardware
Address
State of the client binding.Status
IP address obtained from the DHCP server.Address
Obtained
Indicates whether server update is enabled.Update
Server
Date and time the lease was obtained.Lease
Obtained
Date and time the lease expires.Lease
Expires
Reacquires an IP address from the server for the
interface. When you click this option, the command
sends a discover message if the client state is INIT
and a renew request message if the client state is
BOUND. For all other states it performs no action.
Renew
Clears other resources received earlier from the server,
and reinitializes the client state to INIT for the
particular interface.
Release
Conflicts tab
Date and time the client detected the conflict.Detection
Time
207Copyright © 2017, Juniper Networks, Inc.
Chapter 16: Monitoring Tasks
To Next Page
Loading...
