When the selected test cases are executed, the final result and the recommended
action is displayed.
If there is a cable fault, the port troubleshooter displays details and the recommended
action. For example, the cable must be replaced.
If the port configuration needs to be modified, the port troubleshooter displays details
and the recommended action.
Related
Documentation
• Monitoring Interface Status and Traffic on page 198
• Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 109
• Configuring Gigabit Ethernet Interfaces (CLI Procedure)
• Configuring Gigabit Ethernet Interfaces (CLI Procedure)
• Connecting and Configuring an EX Series Switch (CLI Procedure)
• Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 45
Copyright © 2017, Juniper Networks, Inc.260
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Previous Page
Loading...
