forproducts thatdo not have registeredserial numbersor accurateinstallation
base data.
Register your products at: https://tools.juniper.net/svcreg/SRegSerialNum.jsp.
Update your installation base at: If you have a Juniper J-Care service contract, register
any addition, change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/. Failure to do so
can result in significant delays if you need replacement parts. This note does not apply
if you replace existing components with the same type of component.
Related
Documentation
• Contacting Customer Support to Obtain Return Material Authorization on page 213
• Contacting Customer Support to Obtain a Return Materials Authorization for an NFX250
Device
Copyright © 2016, Juniper Networks, Inc.140
EX3200 Switch Hardware Guide
To Next Page
Loading...
