Juniper EX3200 Hardware Guide

Figure 35: Connecting the AC Power Cord Retainer Clip to an AC Power
Supply in an EX3200 Switch
Figure 36: Connecting an AC Power Cord to an AC Power Supply in an
EX3200 Switch
Related
Documentation
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 175•
• Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 178
• Connecting DC Power to an EX3200 Switch on page 163
• Power Supply in EX3200 Switches on page 29
• AC Power Supply LEDs in EX3200 Switches on page 32
Connecting DC Power to an EX3200 Switch
The power supply in an EX3200 switch is a field-replaceable unit (FRU).
Figure 37: DC Power Supply in an EX3200 Switch
163Copyright © 2016, Juniper Networks, Inc.
Chapter 12: Connecting the Switch to Power

Juniper EX3200 Specifications

General

Model	EX3200
Rack Units	1U
Layer Support	Layer 2 and Layer 3
Junos OS	Yes
Maximum VLANs	4093
DRAM	512 MB
Flash Memory	256 MB
Ports	24 or 48
Uplink Ports	4 SFP
Power Supply	AC or DC
MAC Address Table Size	16, 000 entries
Dimensions (W x D x H)	17.4 x 14.4 x 1.7 inches
Weight	12.3 lb (5.6 kg)
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 85% (non-condensing)