Juniper EX3200 Hardware Guide

•
Table 40 on page 76—Optical interface support and copper interface support for
Gigabit Ethernet SFP transceivers.
•
Table 41 on page 95—Optical interface support for Fast Ethernet SFP transceivers.
•
Table42 on page 101—Optical interface support forGigabit Ethernet SFP+ transceivers.
•
Table 43 on page 106—Optical interface support for Gigabit Ethernet XFP transceivers.
Table 40: Optical Interface Support and Copper Interface Support for Gigabit Ethernet SFP
Transceivers in EX3200 Switches
ValueSpecificationEthernet Standard
EX-SFP-1GE-TModel number1000BASE-T
10/100/1000 MbpsRate
RJ-45Connector type
CopperFiber count
–Transmitter wavelength
–Minimum launch power
–Maximum launch power
–Minimum receiver sensitivity
–Maximum input power
CopperFiber type
–Core/Cladding size
–Modal bandwidth
100 m (328 ft)Distance
Not availableDOM support
Junos OS for EX Series switches, Release 9.0 or laterSoftware required
YesSupport for Virtual Chassis
configuration
Copyright © 2016, Juniper Networks, Inc.76
EX3200 Switch Hardware Guide

Juniper EX3200 Specifications

General

Model	EX3200
Rack Units	1U
Layer Support	Layer 2 and Layer 3
Junos OS	Yes
Maximum VLANs	4093
DRAM	512 MB
Flash Memory	256 MB
Ports	24 or 48
Uplink Ports	4 SFP
Power Supply	AC or DC
MAC Address Table Size	16, 000 entries
Dimensions (W x D x H)	17.4 x 14.4 x 1.7 inches
Weight	12.3 lb (5.6 kg)
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 85% (non-condensing)