Juniper EX3200 Hardware Guide

CHAPTER 29
Agency Approvals and Compliance
Statements
•
Agency Approvals for EX Series Switches on page 283
•
Compliance Statements for EMC Requirements for EX Series Switches on page 284
•
Compliance Statements for Acoustic Noise for EX Series Switches on page 288
Agency Approvals for EX Series Switches
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
These hardware devices comply with the following standards:
•
Safety
•
CAN/CSA-C22.2 No. 60950-1 Information Technology Equipment
•
UL 60950-1 Information Technology Equipment
•
EN 60950-1 Information Technology Equipment
•
IEC 60950-1 Information Technology Equipment
•
EN 60825-1 Safety of Laser Products - Part 1: Equipment classification and
requirements
•
EMC
•
FCC 47CFR Part 15 Class A (USA)
•
EN 55022 Class A Emissions (Europe)
•
ICES-003 Class A
•
VCCI Class A (Japan)
•
AS/NZS CISPR 22 Class A (Australia/New Zealand)
•
CISPR 22 Class A
•
EN 55024
•
EN 300386
283Copyright © 2016, Juniper Networks, Inc.

Juniper EX3200 Specifications

General

Model	EX3200
Rack Units	1U
Layer Support	Layer 2 and Layer 3
Junos OS	Yes
Maximum VLANs	4093
DRAM	512 MB
Flash Memory	256 MB
Ports	24 or 48
Uplink Ports	4 SFP
Power Supply	AC or DC
MAC Address Table Size	16, 000 entries
Dimensions (W x D x H)	17.4 x 14.4 x 1.7 inches
Weight	12.3 lb (5.6 kg)
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 85% (non-condensing)