•
Close the top of the cardboard shipping box and seal it with packing tape.
•
Write the RMA number on the exterior of the box to ensure proper tracking.
Related
Documentation
• Returning an EX3200 Switch or Component for Repair or Replacement on page 211
• Removing a Fan Tray from an EX3200 Switch on page 188
• Removing a Power Supply from an EX3200 Switch on page 192
• Removing an Uplink Module from an EX3200 Switch on page 197
• Removing a Transceiver on page 203
Copyright © 2016, Juniper Networks, Inc.216
EX3200 Switch Hardware Guide
To Next Page
Loading...
