Juniper EX4200

Table 40: Optical interface Support for Fast Ethernet SFP Transceivers in EX4200
Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-FE20KT15R13Model number100BASE-BX-D
100 MbpsRate
LCConnector type
SingleFiber count
1550 nmTransmitter wavelength
1310 nmReceiver wavelength
–14 dBmMinimum launch power
–8 dBmMaximum launch power
–45 dBmMinimum receiver sensitivity
–8 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
20 km (12.4 miles)Distance
Not availableDOM support
EX4200-24T, EX4200-24T-DC, EX4200-24P, EX4200-24PX,
EX4200-24F, EX4200-24F-DC, EX4200-48T, EX4200-48T-DC,
EX4200-48P, and EX4200-48PX switches—Junos OS for
EX Series switches, Release 9.3 or later
EX4200-24F-S and EX4200-48T-S switches—Junos OS for
EX Series switches, Release 12.3R4 or later
Software required
NoSupport for Virtual Chassis
configuration
105Copyright © 2015, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications