Table 40: Optical interface Support for Fast Ethernet SFP Transceivers in EX4200
Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-1FE-LX40KModel number100BASE-LX40K
100 MbpsRate
LCConnector type
DualFiber count
1310 nmTransmitter wavelength
–5 dBmMinimum launch power
0 dBmMaximum launch power
–32 dBmMinimum receiver sensitivity
–8 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
40 km (24.8 miles)Distance
Not availableDOM support
EX4200-24T, EX4200-24T-DC, EX4200-24P, EX4200-24PX,
EX4200-24F, EX4200-24F-DC, EX4200-48T, EX4200-48T-DC,
EX4200-48P, and EX4200-48PX switches—Junos OS for
EX Series switches, Release 10.0 or later
EX4200-24F-S and EX4200-48T-S switches—Junos OS for
EX Series switches, Release 12.3R4 or later
Software required
NoSupport for Virtual Chassis
configuration
Copyright © 2015, Juniper Networks, Inc.106
EX4200 Switch Hardware Guide
To Next Page
Loading...
