Juniper EX4200

Table 41: Optical interface Support for Gigabit Ethernet SFP+ Transceivers in EX4200
Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-10GE-SRModel number10GBASE-SR
10 GbpsRate
LCConnector type
DualFiber count
850 nmTransmitter wavelength
–7.3 dBmMinimum launch power
–1 dBmMaximum launch power
–9.9 dBmMinimum receiver sensitivity
–1 dBmMaximum input power
MMFFiber type
50/125 µm62.5/125 µm62.5/125 µmCore/Cladding size
–OM1FDDIFiber grade
400 MHz/km200 MHz/km160 MHz/kmModal bandwidth
66 m (216 ft)33 m (108 ft)26 m (85 ft)Distance
AvailableDOM support
EX4200-24T, EX4200-24T-DC, EX4200-24P,
EX4200-24PX, EX4200-24F, EX4200-24F-DC,
EX4200-48T, EX4200-48T-DC, EX4200-48P,
and EX4200-48PX switches—Junos OS for
EX Series switches, Release 9.4 or later
EX4200-24F-S and EX4200-48T-S
switches—Junos OS for EX Series switches,
Release 12.3R4 or later
Software required
YesSupport for Virtual Chassis configuration
109Copyright © 2015, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications