Juniper EX4200

Table 41: Optical interface Support for Gigabit Ethernet SFP+ Transceivers in EX4200
Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-10GE-LRMModel number10GBASE-LRM
10 GbpsRate
LCConnector type
DualFiber count
1310 nmTransmitter wavelength
–6.5 dBmMinimum launch power
0.5 dBmMaximum launch power
–21 dBmMinimum receiver sensitivity
0.5 dBmMaximum input power
MMFFiber type
50/125 µm50/125 µm62.5/125 µmCore/Cladding size
OM3OM2FDDI/OM1Fiber grade
500 MHz/km500 MHz/km500 MHz/kmModal bandwidth
220 m (722 ft)220 m (722 ft)220 m (722 ft)Distance
AvailableDOM support
EX4200-24T, EX4200-24T-DC, EX4200-24P,
EX4200-24PX, EX4200-24F, EX4200-24F-DC,
EX4200-48T, EX4200-48T-DC, EX4200-48P,
and EX4200-48PX switches—Junos OS for
EX Series switches, Release 9.5 or later
EX4200-24F-S and EX4200-48T-S
switches—Junos OS for EX Series switches,
Release 12.3R4 or later
Software required
YesSupport for Virtual Chassis configuration
Copyright © 2015, Juniper Networks, Inc.110
EX4200 Switch Hardware Guide