Juniper EX4200

Table 42: Optical interface Support for Gigabit Ethernet XFP Transceivers in EX4200
Switches (continued)
ValueSpecificationEthernet Standard
EX-XFP-10GE-ERModel number10GBASE-ER
10 GbpsRate
LCConnector type
DualFiber count
1550 nmTransmitter wavelength
–4.7 dBmMinimum launch power
2 dBmMaximum launch power
–15.8 dBmMinimum receiver sensitivity
–1 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
40 km (24.8 miles)Distance
AvailableDOM support
EX4200-24T, EX4200-24T-DC, EX4200-24P, EX4200-24PX,
EX4200-24F, EX4200-24F-DC, EX4200-48T, EX4200-48T-DC,
EX4200-48P, and EX4200-48PX switches—Junos OS for
EX Series switches, Release 9.0 or later
EX4200-24F-S and EX4200-48T-S switches—Junos OS for
EX Series switches, Release 12.3R4 or later
Software required
YesSupport for Virtual Chassis
configuration on EX4200
switches
115Copyright © 2015, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications