Table 42: Optical interface Support for Gigabit Ethernet XFP Transceivers in EX4200
Switches (continued)
ValueSpecificationEthernet Standard
EX-XFP-10GE-ZRModel number10GBASE-ZR
10 GbpsRate
LCConnector type
DualFiber count
1550 nmTransmitter wavelength
0Minimum launch power
4 dBmMaximum launch power
–30 dBmMinimum receiver sensitivity
–7 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
80 km (49.7 miles)Distance
AvailableDOM support
EX4200-24T, EX4200-24T-DC, EX4200-24P, EX4200-24PX,
EX4200-24F, EX4200-24F-DC, EX4200-48T, EX4200-48T-DC,
EX4200-48P, and EX4200-48PX switches—Junos OS for
EX Series switches, Release 9.0 or later
EX4200-24F-S and EX4200-48T-S switches—Junos OS for
EX Series switches, Release 12.3R4 or later
Software required
YesSupport for Virtual Chassis
configuration on EX4200
switches
Copyright © 2015, Juniper Networks, Inc.116
EX4200 Switch Hardware Guide
To Next Page
Loading...
