Juniper EX4200

Table 42: Optical interface Support for Gigabit Ethernet XFP Transceivers in EX4200
Switches (continued)
ValueSpecificationEthernet Standard
EX-XFP-10GE80KDWDMModel number10GBASE-ZR
10 GbpsRate
LCConnector type
DualFiber count
Tunable (1528 nm through 1569 nm)Transmitter wavelength
–1 dBmMinimum launch power
3 dBmMaximum launch power
–24 dBmMinimum receiver sensitivity
–1 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
80 km (49.7 miles)Distance
AvailableDOM support
EX4200-24T, EX4200-24T-DC, EX4200-24P, EX4200-24PX,
EX4200-24F, EX4200-24F-DC, EX4200-48T, EX4200-48T-DC,
EX4200-48P, and EX4200-48PX switches—Junos OS for
EX Series switches, Release 12.1 or later
EX4200-24F-S and EX4200-48T-S switches—Junos OS for
EX Series switches, Release 12.3R4 or later
Software required
YesSupport for Virtual Chassis
configuration on EX4200
switches
Related
Documentation
Uplink Modules in EX4200 Switches on page 18•
• Installing a Transceiver in an EX Series Switch on page 221
• Removing a Transceiver from a Switch on page 223
117Copyright © 2015, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications