Keithley 2010 User Manual

Filter P0
P1
P2
Filter disabled
Moving filter (count = 10)
Repeat filter (count = 10)
Rate S0
S1
S2
0.1 PLC integration
Line cycle integration (16.67ms, 60Hz; 20ms, 50Hz)
10 PLC (166.67ms integration, 60Hz;
200ms integration, 50Hz)
Trigger mode T0
T1
T2
T3
T4
T5
T6
T7
Continuous on Talk
One-shot on Talk
Continuous on GET
One-shot on GET
Continuous on X
One-shot on X
Continuous on External Trigger
One-shot on External Trigger
Reading mode B0
B1
B2
Readings from A/D converter
Individual readings from data store
All readings from data store (buffer dump)
Data store size I0
In
Disable data store
Data store of n (n=1 to 500), fill and stop
Interval Q0
Qn
Default interval, 175ms (SELECT OFF)
n=interval in milliseconds (15ms to 999999ms)
Value V±nn.nnnn or
V±n.nnnnnnE+n
Zero value, simulated reference junction temperature
Default conditions L0 Restore factory default conditions
Data format G0
G1
G2
G3
G4
G5
G6
G7
Reading with prefix.
Reading without prefix.
Reading and buffer location with prefix.
Reading and buffer location without prefix.
Reading and channel with prefix.
Reading and channel without prefix.
Reading, buffer location, and channel with prefix.
Reading, buffer location, and channel without prefix.
SRQ M0
M1
M2
M4
M8
M16
M32
Disable
Reading overflow
Data store full
Data store half full
Reading done
Ready
Error
Table D-1 (cont.)
Models 196/199 device-dependent command summary
Mode Command Description
Models 196/199 Commands D-3

Keithley 2010 Specifications

General

Brand	Keithley
Model	2010
Category	Multimeter
Language	English