Keithley 2010 User Manual

Calculating DC characteristics accuracy A-8
Calibration 3-30
Carrying case 1-6
Case sensitivity 4-29
Changing function and range C-2
Command codes E-9
Command execution rules 4-32
Command path rules 4-32
Command words 4-27
Commands and command parameters 4-27
Common commands 4-34, E-9
Condition registers 4-17
Configuration 2-32, 2-33, 2-34, 2-35
CONFigure Command 5-2
Connections 2-16, 2-20, 2-22, 2-24, 2-29,
2-31, 2-36, 2-37
Control source and event detection 3-8
Controlling the Model 2010 via the RS-232
COM2 port C-12
Counters 3-10, 3-24
Crest factor 2-17
D
Data lines E-4
dB calculation 2-35
dBm calculation 2-34
DC voltage, DC current, and resistance A-11
DCL (device clear) 4-13
Delay 3-9
Device actions 3-10
Digits 3-5
Display 2-16
DISPlay subsystem 5-26
Dry circuit testing 2-26
E
Enable registers 4-17
Enabling limits 3-19
Error and status messages 4-15
Error messages 4-7
Error queue 4-20
Event registers 4-17
Example Programs C-1
External scanning 3-28
External trigger 3-12
External triggering 3-11
External triggering example 3-12
External triggering with BNC connections 3-15
F
Feature overview 1-2
FETCh? command 5-3
Filter 3-3
Filter types 3-4
Front panel GPIB operation 4-15
Front panel scanner controls 3-20
Front panel summary 2-3
FRTD commands 5-52
G
Gate time 2-28
General Bus Commands 4-12
General Bus Commands and Associated
Statements 4-12
General Information 1-1
General purpose probes 1-4
Generating SRQ on buffer full C-5
GET (group execute trigger) 4-14
GPIB bus 4-3
GPIB bus connections 4-8
GPIB bus operation and reference 4-8
GPIB bus standards 4-8
GPIB primary address 2-15
GPIB status indicators 4-15
GTL (go to local) 4-13
H
Handshake lines E-5
High energy circuit safety precautions 2-11
Hold example 3-11
I
Idle 3-8
Idle and initiate 4-25
IEEE command groups E-12
IEEE-488 and SCPI Conformance
Information F-1
IEEE-488 Bus Overview E-1
IFC (interface clear) 4-12
Inspection 1-4
Install the universal language driver 4-10
Interface function codes E-13
Introduction 1-2, 2-2, 3-2, 4-2, 4-8, E-2, F-2
K
Keithley Models 196/199 Digital
Multimeter 4-4

Keithley 2010 Specifications

General

Frequency Range	3 Hz to 300 kHz
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
DC Current Range	3 A
DC Current Accuracy	0.05%
AC Current Range	3 A
Resistance Accuracy	0.01%
Interface	GPIB, RS-232
Power Supply	50 Hz or 60 Hz