13. DRIVE TRAIN
13-22
MXU 500
Inspect the right gear case and oil seal for
wear or damage.
If any wear or damage is found, replace the
oil seal with a new one.
Check the right gear case bearing for wear
or damage.
If any wear or damage is found, replace the
bearing with a new one.
Check the outer race play and smooth
rotation of the bearing by hand while it is on
the front drive.
Inspect the ring gear for wear or damage.
If the ring gear is damaged, inspect the
pinion gear also.
If any defects are found, replace the
bearings and ring gear with the new ones.
To Next Page
Loading...
