14. FRONT WHEEL/FRONT SUSPENSION/
STEERING SYSTEM
14-14
MXU 500
Inspect the inner race play of the bearing by
hand while it is in the steering knuckle.
Rotate the inner race by hand to inspect for
abnormal noise and smooth rotation.
If there is anything unusual, replace the
bearing with a new one.
Remove the bearings using the appropriate
bar, then remove the spacer.
ASSEMBLY
Apply lightweight lithium-soap base grease
to the new bearings of the steering knuckle
and lips of the new dust seal before install
them.
Make sure to check bearing in the same
manner.
＊
Play
Lightweigh
To Next Page
Loading...
