X75HD/X75SD Installation and Operation Manual 313
Appendix D: Software
In the top left portion of the window are SNMP Agent settings.
Below the SNMP Agent settings are System settings. The
information in these fields describes the device that is currently
selected in the Navigation window. This is user-defined
information that, once provided by an administrator, is available on
the device when it is retrieved by a MIB browser.
The Trap Destination IP Addresses field contains a list of IP
addresses that will receive SNMP traps. It is in the format IP
Address:Port Address:SNMP version.
Table D-3. SNMP Agent Fields of SNMP Tab
Field Function
Port Number (Can be from 0 to 65535) The network port used by
the SNMP agent; port 161 is the default for
X75HD/X75SD
Read Community Has to match the “read community” setting in your
MIB browser
Write Community Has to match the “write community” setting in your
MIB browser
Enable
Authentication
Traps
When checked, authentication traps are sent if the
read or write community doesn’t match between the
SNMP agent and MIB browser
Enable SNMP
Agent
When checked, SNMP support is available; if not
checked, SNMP support is disabled
Table D-4. System Fields of SNMP Tab - MIB-2 System
Information
Field Explanation
Description The default is “Leitch SNMP Agent”
Location The physical location of the device
Contact The contact person for this device
Name Name of the device
To Next Page
Loading...
