102
Prestige Owner’s Guide
1. Press and release the red MEMORIZE button (next to the BANK PRESETS) causing it to light.
The
TOUCH SCREEN will read: MEMORIZING TO:
2. Press the CUSTOM 3 button. The TOUCH SCREEN will read: MEMORIZING TO: CUSTOM #3
3. Press the purple colored DUET HARMONY button located over on the right side of the control panel.
The
TOUCH SCREEN will read: MEMORIZING TO: CUSTOM #3 DUET.
4. Press the red MEMORIZE button again, turning it off. The TOUCH SCREEN will read: MEMORIZED TO:
CUSTOM #3
.
The
UPPER DUET HARMONY button may now be turned on and off by pressing the CUSTOM 3 button. This
setting replaces the factory setting of NEXT PRESET.
Activate a Foot Switch
TRY THIS: Let’s Activate a foot switch that may be easier to do by pressing a CUSTOM button.
Follow these steps to activate the Glide/Sustain Foot Switch (left Foot Switch) by pressing the CUSTOM #4
button.
1. Press and release the red
MEMORIZE button (next to the BANK PRESETS) causing it to light.
The
TOUCH SCREEN will read: MEMORIZING TO:
2. Press the CUSTOM 4 button. The TOUCH SCREEN will read: MEMORIZING TO: CUSTOM #4
3. Activate the Glide/Sustain Foot Switch by sliding your foot to the righth on the Volume Pedal. The
TOUCH SCREEN will read: MEMORIZING TO: CUSTOM #4 GLIDE SUSTAIN.
4. Press the red MEMORIZE button again, turning it off. The TOUCH SCREEN will read: MEMORIZED TO:
CUSTOM #4
.
The
GLIDE/SUSTAIN feature may now be activated by pressing the CUSTOM 4 button. For example, with a
sound that can glide, like
HAWAIIAN GUITAR, press and hold the CUTOM 4 button. Play an upper keyboard
note and then release the Custom 4 button. The Hawaiian Guitar sound will glide. Pressing the Custom 4
button will add Sustain to a sound such as Piano.
This setting replaces the factory setting of
PRESET INFORMATION display.
Reset The Custom Buttons
Turning the organ off or pressing the RESET button will NOT change any CUSTOM button settings. To return
a Custom button to the factory setting, press and hold the CUSTOM button and then press and release the
RESET button. Release the CUSTOM button after the panel lights turn back on.
How To Use It:
In addition to being able to quickly pull up a particular TOUCH SCREEN display that you find yourself using
often, you can also use the Custom buttons to activate one or more buttons on the panel. Think of it as being
able to take a button from one area of the organ and putting it in a Custom button for easier access.
Note: When saving a screen or feature to a Custom button, selecting the
VALUE & SETTING screen button
will result in the screen (for the feature saved in the Custom button) NOT to display unless that certain screen
display is already visible in the Touch Screen. The examples shown utilize the SCREEN DISPLAY screen but-
ton in the process of customizing a Custom
button.
Selecting the
VALUE & SETTING screen button when customizing a Custom button results in the changes
made to a feature being implemented when that Custom button is selected. Certain features’ values, such
as Drawbar settings, may not be saved in a Custom button using the VALUE & SETTING screen button. The
screen will display the message
NOT MEMORIZED at the end of the memorizing process.
To Next Page
Loading...
