121
Feature Pages
To change the factory setting of any section, press the section name, on the screen, and then press the word
EDIT on the screen. The screen will display another Effects choice, under the heading Effect Type, along
with three additional boxes, under the heading Editing Parameter, which contain additional editing capabil-
ities for the Effect.
Press the box on the screen, under the heading
EFFECT TYPE, then press either SCROLL button to display
the other Effects choices.
To change the character of a particular Effect press the choice, on the screen, under the heading
EDITING
PARAMETER
. The box will become highlighted. Press either SCROLL button to change the numeric value.
•AMOUNT: How much of the effect do you want?
•RATE- SLOW/FAST: How fast or slow do you want the effect to be?
•DEPTH - ACCELERATION - RESONANCE - FEED BACK: How deep, shallow, quick, bright, or long do you
want this effect to be?
Each choice has a range of 0 (no effect) to 100 (Maximum).
How To Use It:
If desired, this section gives you the ability to change the Effects on the sounds for the five sections of the
organ. For example, applying the ENSEMBLE Effect to the ORCH 1 section creates the effect of having many
Trombones playing at the same time, when using the Orchestral Trombone sound. Any changes can be saved
into a
BANK PRESET. Pressing the RESET button or turning the organ off will return this section to the fac-
tory settings.
Press the lighted
FEATURE(CLEAR) button to return to the POWER-UP screen.
2. Edit Genius Sounds-SHORTCUT=FEATURE + ANY BELOW LISTED GENIUS BUTTON
What It Does:
EDIT GENIUS SOUNDS gives you the ability to change (edit) the sounds of the Genius sections:
1.
ORCH GENIUS 1 - The Orchestral GENIUS 1 button.
2. ORCH GENIUS 2 - The Orchestral GENIUS 2 button.
Remember, when any two Orchestral sounds are used at the same time, one of the buttons will be
lighted constantly (Orch 1) and the second will blink on and off (Orch 2).
3. UPPER GENIUS - The Upper GENIUS tab.
4. LOWER GENIUS - The Lower GENIUS tab.
5.
PEDAL GENIUS - The Pedal GENIUS tab.
6. GOLDEN HARP - The Golden Harp GENIUS button.
6.
SOLO GENIUS 1 - The Solo GENIUS 1 button.
7. SOLO GENIUS 2 - The Solo GENIUS 2 button.
Remember, when any two Solo sounds are used at the same time, one of the buttons will be
lighted constantly (Solo 1) and the second will blink on and off (Solo 2).
How It Works:
Each EFFECT is preset from the factory and need not be changed.
Press the word
EFFECT on the screen. The screen will display the
factory preset Effects settings for all five sections. You can turn the
Effects on and off, for each section, by pressing the name of the sec-
tion on the screen.
To Next Page
Loading...
