84
Prestige Owner’s Guide
ORCH & SOLO VOLUMES
To raise the volume, press the top button. To lower the volume, press the bottom button. It may be neces-
sary to tap the button several times to achieve the desired volume. The column of red and green colored
lights next to the volume buttons will visually illustrate the volume levels. All lights illuminated red indi-
cates full volume.
Volume levels range from 0 (no volume) to 100 (maximum). Pressing the
KEYPAD button on the TOUCH
SCREEN will display the Numeric Keypad and enable you to change the volume level. Enter the desired
number on the Keypad and press either the ORCH VOLUME or SOLO VOLUME button. It makes no differ-
ence whether you press the upper or lower button. The volume level will instantly change to the new level.
How To Use It:
These buttons act as the main volume control for the Orchestral and Solo sounds. Use them to set the desired
volume levels.
The capability of having two red Orchestral sounds and/or two blue Solo sounds selected at the same time
means the organ needs to be able to balance the sounds’ volume levels. Refer to
FEATURE PAGE 1 - LEVELS
(BALANCE) on page 111.
RECAP OF THIS SECTION
There are three types of buttons in this section:
1. Red Orchestral and Blue Solo buttons that produce sounds.
2. Buttons that modify, or change, the sounds - REPEAT, PORTAMENTO, UPPER OCTAVE, LOWER
OCTAVE, TRANSPOSE, DYNAMIC KEYING, ORCH
VOLUME, and SOLO VOLUME.
3. Buttons that determine upon which keyboard the sound will be played - red Orchestral UPPER ON,
LOWER LEFT
and LOWER RIGHT and blue Solo UPPER ON, LOWER RIGHT and LOWER
OCTAVE.
•Orchestral sounds are polyphonic-many notes can be played.
•Solo sounds are monophonic-one note at a time can be played.
•Genius Voice capability greatly expands the number of sounds available.
•The Keyboard Split feature creates a third keyboard.
•The foot switch on the left side of the Volume Pedal adds Glide or Sustain to certain sounds.
•Presets automatically utilize these sounds and features buttons for ease of operation.
What It Does:
The ORCH VOLUME buttons control the overall volume level of the red
Orchestral sounds. The
SOLO VOLUME buttons control the overall volume
level of the blue Solo sounds. The volume level for each sound is preset
from the Lowrey factory. The numerous Presets also set the volume levels
for you.
How It Works:
The ORCHESTRAL VOLUME control is two red-colored buttons located on
the left side of the Orchestral section. The SOLO VOLUME control is two
blue-colored buttons located on the right side of the Solo section.
To Next Page
Loading...
