72
Prestige Owner’s Guide
TRY THIS: Try the following example to see how to change the Sustain level from the factory preset amount.
1. Press the
RESET button.
2. Press and hold the FEATURE (CLEAR) button
3. Press the green UPPER FLUTE SUSTAIN tab. The screen will display the Sustain lengths.
4. Press the box on the screen:
UPPER FLUTES = 60. It will become highlighted.
5. Play a few notes on the upper keyboard. Notice how the sound stops when the key is released.
6. Press the green UPPER FLUTE SUSTAIN tab, turning it on.
7. Play a few more notes and listen to how the sound fades away after they are released.
8. Press the top
SCROLL button until the number in the box is 85.
9. Play a few more notes and listen to how much longer the sustain effect causes the sound to linger and
fade away
.
10. Press the RESET button to restore the Sustain levels back to the factory setting.
GENIUS
What It Does:
The word GENIUS on a tab or button means that you have the option of assigning any number of sounds,
from the Genius Voice List, to that tab or button.
The Genius tabs are: Pedal Genius (orange), Lower Genius and Upper Genius (gray), and Lower and Upper
Theatre Genius (purple).
IMPORTANT: In addition to the five (5) Genius tabs there are seven (7) Genius buttons:Genius 1 & 2 (red)
in the Orchestral section, Genius 1 & 2 (blue) in the Solo section, Genius (gray) in the Golden Harp section,
and the Genius 1 & 2 buttons (green) in the Sound Effects section. These Genius buttons will be detailed in
the related sections of this book. Both Genius tabs and Genius buttons operate the same way.
A complete list of the Genius Voices can be found in the back of this book -
GENIUS VOICE LIST in alpha-
betic order.
How It Works:
Each GENIUS button or tab has a preset sound assigned to it from the factory. Pressing a Genius tab (or but-
ton) turning it on, will activate the sound and cause the Touch Screen to display the name of the Genius
sound.
SHORTCUT:
At this point, pressing either SCROLL button causes the screen to display different voice selections and
allows you to change the GENIUS VOICE in that particular tab (or button).
The Presets shown in the “Let’s Get Started” section use a wide variety of these
GENIUS sounds.
How To Use It:
Use the GENIUS capability to add a wide variety of sounds and to create new registrations for your music.
The easiest way to explore the hundreds of options the
GENIUS feature holds is to start with one of the many
GENERAL, CATEGORY, or BANK PRESET sounds and then make Genius Voice changes. If you find one you
really like, save it in a
BANK PRESET.
For more options, see
FEATURE PAGE 4-EDIT GENIUS, on page 121.
To Next Page
Loading...
