74
Prestige Owner’s Guide
To decrease the volume of an individual Flute tab, press the screen just above the flute footage
number (1 3/5, 2, 4, 16) on the image of Drawbar you wish to change. The Drawbar image will shorten,
decreasing the volume.
Another method to decrease the volume is to press the Drawbar image, highlighting it, and then
repeatedly press the bottom
SCROLL button, causing the Flute Drawbar image to shorten, decreasing the
volume.
Pressing the
RESET button or turning off the organ will reset the DRAWBARS back to the factory setting.
When you find a Drawbar setting you like save it on a
BANK PRESET.
How To Use It:
The Drawbar feature is used to create unique Flute tone colors for the upper keyboard. The DRAWBAR set-
tings are preset from the factory and need not be changed. The
B BANK PRESETS give you ten fabulous
Drawbar settings.
TO QUICKLY SET THE VOLUME OF A SPECIFIC FLUTE TAB...
SHORTCUT 1:
1. Press the KEYPAD screen button to display the Numeric Keypad. Press a number - 1 through 10 -
on the Keypad.
2. Press the individual Flute tab you want to change. The volume of the Flute tab will be changed to the
value pressed on the Keypad.
There is no visual indication of the volume using this method.
SHORTCUT 2:
1. Press and hold the FEATURE (CLEAR) button.
2. Press the
FLUTE tab you wish to change.
3. Release the FEATURE (CLEAR) button. The DRAWBARS display for the section (Upper, Lower, Bass) for
the Flute tab pressed will appear in the Touch Screen.
4. Change the volume by touching the screen, as previously described.
SHORTCUT 3:
Press the CUSTOM 2 button to instantly display the Upper Drawbar display.
FLUTE PERC DRAWBAR DISPLAY
The FLUTE PERC drawbar display contains five separate Drawbars: 8, 5 1/3, 4, 2 2/3, and 2 plus a Decay
Drawbar. Just like the other Drawbar controls, the volume can be changed along with the amount of decay.
Decay is how long it takes the Flute Perc sound to fade away. Remember, the Flute Perc sound fades away,
even if the keys are held down.
Hold the
FEATURE (CLEAR) button and press the FLUTE PERC tab to display the Flute Perc Drawbars.
A TIP FROM LOWREY:
As you change the Drawbar settings you can instantly hear the results by playing notes on the appropriate
keyboard. For example, while changing the Upper Drawbars play some notes on the Upper Keyboard to hear
the change.
IMPORTANT:
The only way to completely silence a Drawbar is to press the Tab, turning it off. The minimum volume set-
ting for a Flute is 1 (on the Drawbars) when the Tab is on. All of the Flute Perc. sounds can be turned off
with the Drawbars on the screen, except the last one left on, which has a minimum volume setting of 1.
To Next Page
Loading...
