Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 114Caller ID
Caller ID/PRI ANI Comparison 3
Caller ID information arrives between the first and second ring at an extension.
PRI ANI uses the second screen of the telephone display to show the called party
number, while Caller ID generally uses this page to display the facility number.
Mode Differences 3
Behind Switch Mode 3
If a customer subscribes to both Caller ID and a CO’s call-waiting service on the
same line, Caller ID information for the first incoming call is transmitted and
appears at the display. However, the communications system does not provide
the Caller ID information for the second (call-waiting) call.
Feature Interactions 3
Conference The number of participants is shown on Line 1 of the display. The
conference originator can view call information associated with any
participant by pressing the Inspct button and the button the caller is on.
Coverage Caller ID information is available to users receiving coverage calls.
Display
1R&DOOHU,'is displayed if the call is answered before the Caller ID
data arrives. Calling Party Number information appears in the PRI ANI
format. However, outgoing calling information is not displayed.
Do Not Disturb Caller ID information is not displayed when a user turns on Do Not
Disturb.
If a user turns on Do Not Disturb while receiving Caller ID information, the
information remains on the display.
Forward and
Follow Me
The systemwide LS-ID delay, if programmed, is in addition to the
Forwarding Delay. The total delay is the LS-ID delay plus the Forwarding
Delay.
For Release 6.0 systems (Hybrid/PBX mode only), Remote Call
Forwarding can be used in combination with Caller ID. The LS-ID Delay
option must be programmed to On for each line connected to the
800 GS/LS-ID module. To pass Caller ID information across the private
network when a call is transferred, set the Forwarding Delay to one ring.
Transfer of the call must be completed before the call is forwarded. The
user at the extension that first receives the Caller ID call from the PSTN
must activate Forwarding and specify forwarding across the private
network, over PRI tandem trunks only, to a non-local extension with an
MLX display telephone. When the call is received on the destination MLX
display telephone, the user sees the Caller ID information. For more
information, see “Forward and Follow Me” on page 289
.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English