Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Issue 1
August 1998
Features
Page 115Caller ID
Forward and
Follow Me
continued
In Release 6.1 and later systems (Hybrid/PBX mode only), Forward can
be used to send calls to a non-local extension across a private network.
Caller ID information is sent with the forwarded call if PRI tandem trunks
connect the systems.
Group Calling Caller ID information appears on the display. Outgoing call information is
not displayed.
In Release 6.1 and later systems (Hybrid/PBX mode only), Caller ID
information can be passed across a private network that uses PRI
tandem trunks. This is done by assigning the LS-ID lines connected to the
800 GS/LS-ID module to ring directly into a calling group containing a
single non-local member. The LS-ID Delay option must be programmed to
On for each line routed.
Headset Options When using Headset Auto Answer, program the LS-ID Delay option to
avoid loss of Caller ID information.
Night Service Caller ID information appears on the display, whether or not Night Service
has been activated.
Personal Lines Caller ID information appears on the display of shared personal lines.
Outgoing call information is not displayed.
Pools Collisions are avoided on two-way trunks. Trunks programmed with the
LS-ID Delay option are not seized from a pool for outgoing calls if a call is
coming in on that trunk.
Remote Access Caller ID information is not retrieved on remote access lines/trunks unless
LS-ID Delay is programmed for the line/trunk because the calls are
answered too quickly.
Ringing Options LS-ID Delay or Delay Ring can be used to delay the ringing on lines
answered automatically so Caller ID information is not lost. If a line/trunk
has LS-ID Delay, Delay Ring gives an additional delay.
Service Observing In Release 6.1 and later systems Service Observers do not receive Caller
ID information for an observed call, including Calling Party number, Called
Party number, Call Type, and Facility ID.
System Access/
Intercom Buttons
Calls ringing on both SA and Shared SA buttons display Caller ID
information on Line 1 of the first display screen. The information remains
on the answering extension’s display only. If another person picks up on
that extension, he or she sees
,Q8VH on the display, and the answering
extension shows
6KDUHG/LQH([W$OSKD of the other extension on
Line 2 of the first display screen.
SMDR Use the ISDN format if you subscribe to Caller ID, whether or not your
company subscribes to PRI. The calling party number of an incoming call
appears in the NUMBER field. Also, an
, appears in the CALL TYPE field.
If no information has been received from the CO, the word
,1 appears in
the NUMBER field and a
&appears in the CALL TYPE field.
If you do not use any type of delay option and youare using a device with
automatic pickup, or if you manually pick up the call before the Caller ID
information arrives,
,1 appears in the NUMBER field and a&appears in
the CALL TYPE field.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English