MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 116Caller ID
Transfer If Caller ID information is available, the caller’s telephone number is
shown on Line 1 of the first screen. Outgoing call information is not
displayed. The extension that initiated the transfer is shown on Line 1 of
the second screen. Caller ID information is also displayed when a call
returns from transfer.
UDP Features In Release 6.0 and later systems (Hybrid/PBX mode only), if a PRI
tandem trunk conveys a call from the receiving system to a remote
networked system without user intervention, Caller ID information is also
conveyed. If the tandem trunk is an analog or digital tie trunk, no Caller ID
information is sent to the remote system. If a Caller ID call is transferred
from the receiving system to the remote system, no Caller ID information
is conveyed.
In Release 6.1 and later systems (Hybrid/PBX mode only), when a
system operator transfers a call to a non-local extension by using a DSS
with one-touch Transfer along with Automatic Completion (on a DLC) or
Automatic Extended Call Completion (on a QCC), the Caller ID
information is sent if PRI tandem trunks are used.
To Next Page
Loading...
