MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 294Forward and Follow Me
Use of Forward or Follow Me
Whether calls are sent by using Forward or using Follow Me depends on where
the feature is activated:
■Forward and Remote Call Forwarding are activated at a user’s own
extension or from an outside telephone by remote access. Forward can be
deactivated at a user’s own extension, at a local extension to which the
user’s calls are forwarded, or from an outside telephone by remote access.
(System programming is required to allow Remote Call Forwarding.)
Forward to a non-local extension can be activated only at the user’s own
extension.
NOTES:
1. In Release 6.0 and later systems (Hybrid/PBX mode only),
Follow Me is not supported across a private network.
2. In Release 6.0 (Hybrid/PBX mode only), Forward is not
supported across a private network.
3. In Release 6.1 and later systems (Hybrid/PBX mode only),
Forward is supported across a private network.
4. In Release 6.0 and later systems, a user with an authorization
code can turn Forward or Remote Call Forwarding on or off from
a multiline telephone at another extension in the local system.
He or she first dials the authorization code for his or her home
extension and then activates the feature normally. A single-line
telephone user and a remote access user cannot enter the
Pause character, if required, in a Remote Call Forwarding digit
string.
■Follow Me is activated at another local extension to send a user’s calls to
that local extension. It can be deactivated at a user’s own extension or at
the local extension to which calls are sent. Follow Me can be used only to
send calls to a local extension, not to an outside telephone number or
non-local extension.
If several extensions are sending their calls to a user, that user can turn off
Forward and Follow Me either for one extension at a time or for all extensions.
To Next Page
Loading...
Need help?
General
