MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 313Group Calling
At a Glance - Continued
System Programming
continued
Assign maximum number of calls allowed in calling group
queue (Release 6.0 and later systems):
●
([WHQVLRQV→More→*US&DOOLQJ→More→4XHXH
&WUO
→Dial calling group ext. no.→(QWHU→Dial no. of calls
allowed in queue
→(QWHU
Select hunt type, Circular, Linear, or Most Idle (Release 5.0
and later systems):
●
([WHQVLRQV→More→*US&DOOLQJ→+XQW7\SH
Designate delay announcement device. In Release 5.0 and
later systems, designate as many as ten primary delay
announcement devices and one secondary device, set
interval between the first and second announcements, and
specify whether second announcement repeats:
●
([WHQVLRQV→More→*US&DOOLQJ→'HOD\$QQFH
Calling group as receiver for a Group Coverage sender:
●
([WHQVLRQV→More→*US&DOOLQJ→*US&RYHUDJH
Assign message-waiting receiver for calling group:
●
([WHQVLRQV→More→*US&DOOLQJ→0HVVDJH
Select/set overflow basis and/or threshold and designate
calling group or QCC queue as overflow receiver:
●
([WHQVLRQV→More→*US&DOOLQJ→2YHUIORZ→calling
group no./QCC
→1XPEHU%DVHG2YHUIORZ,7LPH%DVHG
2YHUIORZ
, or3URPSW%DVHG2YHUIORZ(Release 6.0 and
later systems)
Choose calling group type to determine whether calling group
members are automatically logged in after a system restart.
When a calling group is used for voice messaging systems,
specify whether VMI type is integrated or generic:
●
([WHQVLRQV→More→*US&DOOLQJ→*URXS7\SH
Set calls-in-queue alarm threshold; in Release 5.0 and later
systems, specify up to three alarm levels to signal increasing
number of callers waiting:
●
([WHQVLRQV→More→*US&DOOLQJ→4XHXH$ODUP
Set the overflow threshold time:
●
([WHQVLRQV→More→*US&DOOLQJ→2YHUIORZ→Calling
Group No.
→ 7LPH%DVHG2YHUIORZ
Assign external alert to notify calling group members of
calls-in-queue alarm:
●
([WHQVLRQV→More→*US&DOOLQJ→;WQO$OHUW
Enter display label for calling group:
●
More→/DEHOLQJ→*US&DOOLQJ