MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 314Group Calling
At a Glance - Continued
NOTE:
For additional information about calling group activities, see “Extension
Status” on page 280.
Maximums
Calling groups
Extensions for each group
Calling groups for each
extension
Calling groups for each
line/trunk
Delay announcement
devices for each system
Primary devices per group
Secondary devices per
group
Message-waiting receivers
for each calling group
Calls-in-Queue Alarm
threshold levels
External Alerts for each
group
Overflow Receivers for
each group
Calls in calling group queue
32
20 local, 1 non-local (Release 6.1 or later systems)
1
1
200 can be shared among groups for Release 5.0 and later; in
earlier systems, 32
10 in Release 5.0 and later; in earlier systems, 1)
1 (Release 5.0 and later)
1 (can be shared among groups)
3 per group for Release 5.0 and later; in earlier systems, 1
1 (cannot be shared among groups)
1 (can be shared among groups)
0–99 (setting available in Release 6.0 and later)
Factory Settings
Calls in Calling Group
Queue
Overflow Threshold
Number-based
Time-based
Prompt-based
Repeat Secondary Delay
Announcement
Time between
Announcements
Calls-in-Queue Alarm
Levels
Threshold 1
Threshold 2
Threshold 3
Calls-in-Queue Alarm
Calling group extension
numbers
Extension Status
Hunt Type
Group Type
99 (setting can be changed in Release 6.0 and later systems
only)
1 call (range 1–99 calls)
0 (0–900 sec)
Off; Release 6.0 and later systems
Off; Release 5.0 and later systems
0 (0–900 sec); Release 5.0 and later systems
1 call (range 1–99 calls)
1 call (range 1–99 calls)
1 call (range 1–99 calls)
In Release 4.2 and earlier systems, 1 call (range 1–99 calls)
Release 5.0 and later systems only
770–791, 7920–7929
Calling Group/CMS
Circular
Auto Logout
To Next Page
Loading...
Need help?
General
