EasyManuals Logo

Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

Lucent Technologies MERLIN LEGEND Release 6.1
1021 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #418 background imageLoading...
Page #418 background image
MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 369Integrated Administration
Integrated Administration in Release 4.1 and
Later Systems 24
Because of enhancements to coverage timers in Release 4.1 and later systems,
Integrated Administration cannot be used in these systems to program certain
options for AUDIX Voice Power. Instead, the MLX-20L telephone designated for
system programming or a PC with SPM software must be used to program the
settings.
Using system programming, change the following settings to match the factory
settings for Integrated Administration:
The default setting of No for Reliable Disconnect on loop-start lines.
Change this option to Yes (see
System Programming
).
The default setting of four rings for VMS Transfer Return time. Change this
option to six rings (see “Transfer” on page 693
).
The default setting of four rings for Transfer Return time. Change this
option to six rings (see “Transfer” on page 693
).
Use the system programming console or SPM software to program the settings
listed below. Do not use the Application Switch Defaults menu in Integrated
Administration. (“Group Calling” on page 312
, “Coverage” on page 152, “Labeling”
on page 400, and “Transfer” on page 693 provide details about these settings.)
A calling group extension number other than the default of 770
A Call Answer calling group number other than the default of 7926
A FAX Response calling group number other than the default of 7924
An Information Service calling group number other than the default of 7927
A Message Drop calling group number other than the default of 7928
A Voice Mail calling group number other than the default of 7925
Group Coverage by a calling group
Coverage delay timers, which have been substantially changed in Release
4.1 and later systems
VMS Transfer Return setting
Transfer Return setting
The systemwide Delay Ring Interval, which does not exist in Release 4.1
and later systems
An AUDIX Voice Power calling group label other than the default of
$8',;93

Table of Contents

Other manuals for Lucent Technologies MERLIN LEGEND Release 6.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies MERLIN LEGEND Release 6.1 and is the answer not in the manual?

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General IconGeneral
BrandLucent Technologies
ModelMERLIN LEGEND Release 6.1
CategoryConference System
LanguageEnglish

Related product manuals