EasyManuals Logo

Lucent Technologies MERLIN LEGEND Release 6.1 User Manual

Lucent Technologies MERLIN LEGEND Release 6.1
1021 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #425 background imageLoading...
Page #425 background image
MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 376Integrated Administration
NOTE:
The calling group numbers and coverage group number displayed on this
screen (including any changes made) are the values used for the
information sent to the system whenever:
â–  Services are programmed on the System Programming/Switch
Admin Form screen (see Figure 26 on page 384
).
â–  Subscribers are added to the AUDIX Voice Power coverage group
on the AUDIX Voice Power User or AUDIX Voice Power/Fax
Attendant User screen (see Figure 24 on page 381
).
Therefore, if any of these group numbers must be changed, make these
changes
first
, before programming services or subscribers.
If it is necessary to change any calling group numbers
after
initial programming of
the services, make the changes in the following order:
1. Remove the affected services by deleting those services from all channels
on the System Programming/Switch Admin Form screen.
2. Change the appropriate calling group numbers on the Application Switch
Defaults screen.
3. Reinstall the affected services by adding them to channels on the System
Programming/Switch Admin Form screen.

Table of Contents

Other manuals for Lucent Technologies MERLIN LEGEND Release 6.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lucent Technologies MERLIN LEGEND Release 6.1 and is the answer not in the manual?

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General IconGeneral
BrandLucent Technologies
ModelMERLIN LEGEND Release 6.1
CategoryConference System
LanguageEnglish

Related product manuals