MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 398Integrated Administration
If an AUDIX Voice Power mailbox is needed for a person with no telephone, a
phantom extension (on the system) or special-purpose extension (through
Integrated Administration) must be assigned to that person.
The date and time should be set the same for AUDIX Voice Power as for the
system.
Mode Differences 26
AUDIX Voice Power (including Fax Attendant) is not supported in Behind Switch
mode.
Feature Interactions 26
Coverage AUDIX Voice Power and private fax extensions are automatically
assigned to coverage group 30, which is covered by the AUDIX Voice
Power calling group. This assignment can be changed by a qualified
technician using the Application Switch Defaults screen.
If the Automated Attendant service is configured for delayed call handling,
a backup (phantom) extension should be assigned and Integrated
Administration sets up coverage for it.
The total of the value programmed for the systemwide Coverage Delay
Interval (Release 4.0 and prior systems) or for the extension-by-extension
coverage delay settings (Release 4.1 and later systems) and the value for
the Delay Ring should be less than either the transfer return time or the
VMS transfer return interval.
See “Integrated Administration in Release 4.1 and Later Systems” on
page 369 for information about using Integrated Administration with
coverage timer changes implemented in Release 4.1 and later systems.
Group Calling AUDIX Voice Power services and the Fax Response service are set up as
members of dedicated calling groups. Integrated Administration sets up
the necessary calling groups with the applicable options for correct
operation of these services.
See “Integrated Administration in Release 4.1 and Later Systems” on
page 369 for information about using Integrated Administration with
Group Calling settings in Release 4.1 and later systems.
Labeling Names entered on the Extension Directory screen are sent to the switch
and appear on system programming labeling screens on the
programming console or in SPM. Names entered appear on the
Extension Directory screen after Extension Directory setup is completed.
Labels are added to lines and calling groups, as appropriate, when
services are selected through Integrated Administration.
Night Service The Automated Attendant service can be used for Night Service
operation. The necessary system programming options can be set
through Integrated Administration.
To Next Page
Loading...
Need help?
General
