MERLIN LEGEND Communications System Release 6.1
Feature Reference
555-661-110
Issue 1
August 1998
Features
Page 410Last Number Dial
If you dial a telephone number and, after the call is connected, dial additional
digits, such as an account number or password, Last Number Dial saves all digits,
including those dialed after the call is connected. In addition, if someone other
than the owner of a display telephone presses the Last Number Dial button, all
dialed digits are shown on the display, including confidential information such as
passwords or account codes.
Last Number Dial does not store numbers dialed through an Extension, Personal,
or System Directory, an inside Auto Dial button, a System Speed Dial code, or a
DSS button.
If the number is dialed using an outside Auto Dial button or Personal Speed Dial
code and includes a special character such as Pause or Stop, the special
character does not work when the number is redialed using Last Number Dial.
Mode Differences 27
Behind Switch 27
In Behind Switch mode, when a user manually dials an outside number that
includes a dial-out code (for example, an ARS or pool dial-out code) required by
the host system, the pauses to wait for dial tone required by some host systems
are not automatically stored for Last Number Dial. As a result, a user may either
hear a fast busy signal or reach a wrong number when using Last Number Dial.
Key Mode 27
Analog multiline telephones in Key mode can use Last Number Dial only if a
Feature button is programmed. This Feature button is used instead of the
 button
to activate the feature code.
Telephone Differences 27
Queued Call Consoles 27
Last Number Dial cannot be used on QCCs.
Other Multiline Telephones 27
To redial a number using Last Number Dial on a multiline telephone, select the
appropriate personal line (outside line) or SA button for the call. Then either press
the programmed Last Number Dial button, or press the Feature button and dial
. The number saved by the feature is dialed automatically. On MLX display
telephones, press the Feature button and select
/DVW1XP'LDO [/DVW] from the
display.
To Next Page
Loading...
Need help?
General
