58
CAUTIONS WHEN WORKING ON MACHINE
• Tidy the footing to avoid falling and always observe the
following precautions during maintenance on the Machine.
• Do not spill oil or grease.
• Always tidy away tools.
• Beware of the footing when walking.
• Do not jump from the Machine under any circumstances.
Use a platform, and secure your body in three locations
(both feet and one hand, or both hands and one foot) when
climbing up or down the Machine.
• Use protective equipment that suit the work.
• Never step on the boom, outrigger or machinery cover to
prevent accidents such as falling or tripping due to slippage.
CAUTIONS WHEN REPLENISHING FUEL OR OIL
Attempt to let a fire approach the fuel or oil may result in
catching fire.
Diesel fuel is used as the fuel and thus requires extra effort to
observe the following.
• Stop the engine when refilling.
• Do not smoke when refilling.
• Immediately wipe away spilt fuel or oil.
• Securely tighten the fuel and oil caps.
• Supply fuel/oil at a location with good ventilation.
• Do not leave the site when replenishing the fuel or oil.
BEWARE OF CHIPS WHEN WORKING WITH HAMMER
When using a hammer, always wear protective equipment
such as safety goggles and a helmet. Also, insert a brass bar
or similar object between the hammer and target object.
Hitting hard metal parts such as a pin or bearing may cause
splintering or chipping, which in turn could cause eye injuries
if safety precautions are not met.
To Next Page
Loading...
