77
[1] Date & Time display
Displays the current time and date.
Example: 17:13 28-08-2015
[2] Hour meter
Displays total operation hours of the machine.
Use this value as a reference for periodical check
intervals.
When the starter switch is in the “ON” position with the
engine running or the machine power source set to the
electric motor, the meter indication increases even if the
machine or the electric motor is not working.
The meter indication increments are “1” every one hour of
machine operation, regardless of the engine or motor
speed.
[3] Engine Speed
Indicates the number of engine revolutions per minute
with a bar indication.
[4] Fuel gauge
Indicates the remaining amount of fuel contained in the
tank when the starter switch is set to the “ON” position.
If the fuel level becomes low during operation,
immediately stop the operation and replenish.
NOTES
Note that the fuel gauge may not indicate a correct fuel
level immediately after the starter switch is set to the “ON”
position. This, however, is not an error.
To Next Page
Loading...
