LH71A / LH72
(E) 5-3
5-1-4. Setting Keys
Be sure to also use the numeric keys to enter setting values.
5-1-5. Setting Method
q When power is turned on for the first time after factory shipping
LH71A general-purpose applications and milling machine function → Go to Part 5-2-1
LH71A lathe function and LH72 → Go to Part 5-3-1
w When changing the basic settings
LH71A general-purpose applications and milling machine function → Go to Part 5-2-2
LH71A lathe function and LH72 → Go to Part 5-3-2
e When changing the detailed settings only
LH71A general-purpose applications and milling machine function → Go to Part 5-2-3
LH71A lathe function and LH72 → Go to Part 5-3-3
5. Settings
The illustration shows the key layout for the LH71A-3.
To Next Page
Loading...
