Magnescale LH71A User Manual

(E) 7-3
7. Operation Method
LH71A / LH72
7-2-5. Addition Display Selection (When LH71A Lathe Function is Selected or for
LH72 Only)
These operations can be performed when the mode lamps are not lit.
How to cancel: Press the key when selecting axis (the axis label will be flashing).
See “5-4. Verifying Count Values during Addition Display”.
7-2-6. Preset Mode
<Setting the preset values> Display
1 Press the key. ( lamp lights up)
2 Press the key corresponding to the axis to be set.
3 Use the numeric key to enter the value.
4 Use the key to finalize the setting.
The current value becomes the set preset value.
5 <Setting the next preset values (max 3 values for each axis)>
Press the key corresponding to the axis to be set.
Press the key.
Perform step 3 and 4.
6 Press the key.
The system exits the preset mode. ( lamp goes out)
<Calling a preset values> Display
1 Press the key. ( lamp lights up)
2 Press the key corresponding to the axis to be called.
The preset value is displayed.
When multiple preset values are set, press the key to
display the next value.
3 Press the key.
The preset value is finalized, and the current value becomes the
set preset value.
4 Press the key.
The system exits the preset mode. ( lamp goes out)
The INC indication remains on during preset mode.
(Current value
display)
(Current value
display)
(Example:
10.000)

Magnescale LH71A Specifications

General

Brand	Magnescale
Model	LH71A
Category	Cash Counter
Language	English