Mercedes-Benz Command - Selecting a Track

Starting playback if the Bluetooth
®
audio device has been stopped
During the search for mobile phones
(
Y page 115), the connection with the Blue-
tooth
®
audio device is terminated. In the
Bluetooth
®
audio basic display (Y page 198)
you will see the No Bluetooth Audio
Device Connected message and the Con‐
nect Last Used Player menu item cannot
be selected.
When the search is finished, the Bluetooth
®
audio device can be reconnected.
X
To select Start playback: Ì: slide 6
and press the controller.
Playback resumes from the beginning.
X
To select Connect Last Used Player:
press the controller.
Depending on the Bluetooth
®
audio device
used, playback starts immediately or you
must start playback manually.
In this case, you will see the Bluetooth
Audio Device Paused message.
i
If there is an Internet connection and the
mobile phone that is connected only sup-
ports two Bluetooth
®
profiles at the same
time, the Internet connection is interrup-
ted.
i The connection to the Bluetooth
®
audio
device can also be interrupted if:
R
the connected mobile phone only sup-
ports 2 Bluetooth
®
profiles at the same
time.
R
you connect to the Internet using
COMAND (
Y page 153).
Selecting a track
The function is not supported by all Blue-
tooth
®
audio devices.
Some mobile phones impair function with
regard to the following criteria:
R
the number of tracks that can be selected
R
the time period until the next or previous
track is played
X
Switch the multifunction steering wheel to
the media menu (see the vehicle Operator's
Manual).
X
To skip forwards or backwards to a
track: press the 9 or : button on
the multifunction steering wheel.
X
Rapid scroll: press and hold the 9
or : button on the multifunction steer-
ing wheel until the desired track is reached.
If you press and hold the 9 or :
buttons, the rapid scrolling speed increa-
ses after a short time.
i
In rapid scroll, track names are not
shown, but instead only Track1, Track2 etc.
The playback times for the tracks played
are not displayed. This is available as an
optional function starting with AVRCP Ver-
sion 1.3. There is also no music search
option available with Bluetooth
®
Audio.
Selecting playback options
If the Bluetooth
®
audio device supports the
corresponding function, the following options
are available:
R
Normal Track Sequence: the tracks are
played in the normal order (e.g. track 1, 2, 3
etc.).
Audio data playback is determined by the
order in which the tracks are written to the
data medium. Alphabetical order is the
most common. Once all the tracks in a
folder have been played, the tracks in the
next folder are played.
R
Random Track List: the current track list
is played in random order (e.g. 3, 8, 5 etc.).
R
Random Medium: all tracks on the data
medium are played in random order (e.g.
track 3, 8, 5 etc.).
Bluetooth
®
audio mode
199
Media
Z